Back to list

Vacancy description

Failure Analysis Engineer, Electromechanical Hardware in Australia

Meta

  • Full-timeStandard weekly hours

$144,000 - $204,000

Australia

Job Description

At Meta, we're building the future of human connection and the technology that enables it, continuously inventing for the next generation of experiences. To move toward advanced machine intelligence, we're enabling AI to go beyond vision and interact with the physical world.

As we move closer to a future with intelligent robots and advanced AI models, we're hiring talent across robotics hardware, system software, machine perception, and artificial intelligence. You'll tackle open problems in robotics and AI, with the opportunity to shape new ways people connect around the world.

We build complex electromechanical hardware, and the parts that move are the highest-risk elements of any program. This role owns failure analysis for hardware that fails design-verification, qualification, and production testing — from first symptom through root cause to a documented, transferable corrective action. You will work in the lab with hardware in your hands, in the data with logs and telemetry, and across electrical engineering, firmware, mechanical engineering, and quality teams to close the loop on defects before they reach a product. Scope spans actuators and drive systems, precision mechanisms, sensors, and the electronics and firmware that control them.

Failure Analysis Engineer, Electromechanical Hardware Responsibilities:

  • Own end-to-end FA for units failing fixture, DVE, and qualification testing: intake, symptom capture, hypothesis-driven teardown, root cause, disposition, and corrective-action follow-through
  • Build and maintain a failure-mode taxonomy for the hardware in scope and classify incoming failures against it, so root causes transfer between units instead of being re-derived every time
  • Diagnose by signature, not by guesswork — isolate the failing domain (mechanical, electrical, firmware, thermal, process) using periodicity, load-vs-position behavior, electrical waveforms, calibration and configuration data, and environmental correlation
  • Write and maintain analysis tooling (Python) that parses test-station reports and time-series logs to classify failure modes automatically at fleet/population scale
  • Run fleet-level correlation studies to accept or refute candidate root causes, and document refuted leads as clearly as confirmed ones
  • Drive nonconformance (NC) and CAPA workflows: file, triage, and close NCs
  • present findings at CCB / design review
  • feed pass-fail criteria improvements back into the test stations
  • Partner with design ME/EE/FW on containment and permanent fixes, and with suppliers on incoming quality and process escapes
  • Perform and interpret physical FA: precision teardown, dimensional/metrology inspection, wear and fracture surface inspection, optical/microscopy, and — where available — CT, SEM/EDX, and cross-sectioning

Minimum Qualifications:

  • Bachelor's degree in Computer Science, Computer Engineering, relevant technical field, or equivalent practical experience
  • 5+ years of hands-on failure analysis, reliability, or test engineering on electromechanical hardware (motors and drives, gearboxes, precision mechanisms, consumer devices, instrumentation, or similar)
  • Demonstrated root-cause methodology: 5-Why, fishbone, fault-tree, DOE, or equivalent, applied to real hardware failures you can talk through in detail
  • Hands-on lab competence: DMM, oscilloscope, power supplies, load/test fixtures, DAQ
  • Experience writing technical FA reports that enable design engineers to act on findings without additional clarification — FA reports that a design engineer can act on without a meeting

Preferred Qualifications:

  • Familiarity with motor control and firmware concepts: commutation, field-oriented control, current limits, calibration tables, and encoder error sources
  • Working knowledge of BLDC/PMSM motors, gear trains, bearings, brakes, and position encoders
  • Working knowledge of quality systems: 8D, PFMEA, DFMEA, control plans, MSA/Gage R&R
  • Experience taking electromechanical assemblies — robotic joints and actuators, or comparable precision hardware — from prototype through DVT/PVT into production
  • Experience querying and building on large test-data pipelines and dashboards
  • Reliability engineering depth: HALT/HASS, Weibull and life-data analysis, rainflow/duty-cycle load-spectrum analysis, accelerated life testing
  • Experience with metrology and analytical FA labs (CT, SEM/EDX, metallography, tribology)

About Meta:

Meta builds technologies that help people connect, find communities, and grow businesses. When Facebook launched in 2004, it changed the way people connect. Apps like Messenger, Instagram and WhatsApp further empowered billions around the world. Now, Meta is moving beyond 2D screens toward immersive experiences like augmented and virtual reality to help build the next evolution in social technology. People who choose to build their careers by building with us at Meta help shape a future that will take us beyond what digital connection makes possible today—beyond the constraints of screens, the limits of distance, and even the rules of physics.

Meta is proud to be an Equal Employment Opportunity and

We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. Meta participates in the E-Verify program in certain locations, as required by law. Please note that Meta may leverage artificial intelligence and machine learning technologies in connection with applications for employment.

Meta is committed to providing reasonable accommodations for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please let us know at .

$144,000/year to $204,000/year + bonus + equity + benefits

Individual compensation is determined by skills, qualifications, experience, and location. Compensation details listed in this posting reflect the base hourly rate, monthly rate, or annual salary only, and do not include bonus, equity or sales incentives, if applicable. In addition to base compensation, Meta offers benefits. Learn more about benefits at Meta.

Similar vacancies

More like this role

  • Remote
  • Part-time

$100 - $120 per hour

... conditions, structural margins, fatigue, thermal constraints, tolerances/GD&T, component selection, reliability, manufacturability, system integration, and engineering failure-mode analysis . - Extensive hands-on experience analyzing, testing, debugging, and validating physical hardware , using relevant engineering tools ...

Australia

  • Full-time
... advanced research, and world-class engineering to provide liquidity across exchanges and asset classes. At IMC, speed and precision are essential. Our FPGA engineers play a critical role in designing and deploying hardware systems that sit on the absolute front line of trading—processing market data, making decisions, and ...

Syd, Australia

Job Description RHL in Sydney seeks a Senior Design Engineer to drive electromechanical product design from concept to production. You will handle fast prototyping, cost‐effective manufacturing decisions, and ensure alignment with our wellbeing and health‐focused brand values. The role requires 7+ years in hands‐on engineering, ...

Syd, Australia

Job Description RHL Recruitment Australia is seeking a Senior Design Engineer in Sydney to deliver robust electromechanical designs that meet specifications and quality targets. You will own solutions across the full product lifecycle with a hands‐on problem‐solving approach. The role requires a mechanical or mechatronic ...

Syd, Australia

Job Description Namawell Pty Ltd seeks a Senior Design Engineer to deliver robust electromechanical designs for food and wellness products in a fast-paced environment. You will transform concepts into manufacturable solutions, balancing performance, cost, and regulatory compliance. You will lead prototype builds, coordinate ...

Syd, Australia

  • On-site
  • Full-time
  • Contract
... that is focused on our people. YOUR ROLE: Come join our growing engineering team as a Driveline Engineer - Hardware. This role enhances Thales’ mechanical engineering expertise by focusing on the development and definition of driveline systems for tactical and military vehicles. The Driveline Engineer will work with agility ...

Bendigo, Australia

Anduril Industries

Manufacturing Test Engineer

  • Full-time
  • QA
... bring-up, system level checkouts and acceptance testing to key component level in process validation. - Develop, execute, and manage test eco-system to de-risk hardware and ensure product meets target reliability levels and ultimate design intent. - Perform hands-on and data-driven root cause analysis of electromechanical subsystems ...

Syd, Australia

  • Full-time
AMO Technician - Electromechanical II Baker Hughes is a global energy technology company serving the oil and gas sector across more than 120 countries Fuel your passion The AMO Technician - Electromechanical you would be responsible for Troubleshooting, testing, assembling, disassembling and perform individual inspection ...

Australia

  • Remote
  • Hybrid
  • QA
... (DFM) considerations. - Support EMI/EMC, vibration, shock and environmental qualification testing to relevant Defence and Military Standards. - Investigate test failures, perform root cause analysis and work with design teams to implement corrective actions. - Develop and maintain product structures and engineering data within ...

Adelaide, Australia

  • On-site
  • Full-time
... producing the next generation of Autonomous Underwater Vehicles globally at rate. The Manufacturing Engineering team owns production readiness and process engineering across the Undersea Dominance product range — from core vehicle platform to specialised mission payloads, spanning mechanical and electrical hardware build ...

Syd, Australia